![](/images/backgrounds/160496/160496-270226x1.png)
Sign-On vs. Stored Credentials
When using wireless security that requires a user name and password to be entered, the Summit Client Utility offers these choices:
•The Username and Password may be entered on the Credentials screen. If this method is selected, anyone using the device can access the network.
•The Username and Password are left blank on the Credentials screen. When the device attempts to connect to the network, a sign on screen is displayed. The user must enter the Username and Password at that time to authenticate.
To Use Stored Credentials
1.After completing the other entries in the profile, click on the Credentials button.
2.Enter the Username and Password on the Credentials screen and click the OK button.
3.Click the Commit button.
4.For LEAP and WPA/LEAP, configuration is complete.
5.For
6.For
7.Access the Credentials screen again. Make sure the Validate server and Use MS store checkboxes are checked.
8.The default is to use the entire certificate store for the CA certificate. Alternatively, use the Browse button next to the CA Cert (CA Certificate Filename) on the Credentials screen to select an individual certificate.
9.For
10.If using EAP FAST and manual PAC provisioning, input the PAC filename and password.
11.Click the OK button then the Commit button.
12.If changes are made to the stored credentials, click Commit to save those changes before making any additional changes to the profile or global parameters.
13.Verify the device is authenticated by reviewing the Status tab. When the device is property configured, the Status tab indicates the device is Authenticated and the method used.
Note: See Configuring the Profile (page
Note: If invalid credentials are entered into the stored credentials, the authentication will fail. No error message is displayed. The user may or may not be prompted to enter valid credentials.
To Use Sign On Screen
1.After completing the other entries in the profile, click on the Credentials button. Leave the Username and Password blank. No entries are necessary on the Credentials screen for LEAP or LEAP/WPA.
2.For
3.For
4.Access the Credentials screen again. Make sure the Validate server and Use MS store checkboxes are checked.
5.The default is to use the entire certificate store for the CA certificate. Alternatively, use the Browse button next to the CA Cert (CA Certificate Filename) on the Credentials screen to select an individual certificate.
6.For
7.Click the OK button then the Commit button.
8.When the device attempts to connect to the network, a
9.Enter the Username and Password. Click the OK button.
8 - 14