![](/images/backgrounds/160496/160496-27052x1.png)
Note: If you are using the RAM ball mount, please go to Step 1a – Attach RAM Ball to Vehicle (page
1.Determine the position for mounting the RAM ball plate. Be sure to position the RAM plate to allow access to the switches and ports on the bottom of the Thor VM2.
2.Attach the RAM ball plate to the vehicle mounting surface using four 1/4 bolts (not included) or equivalent fasten- ers.
3.If not already attached, attach the RAM ball to the RAM ball plate using three M6 nuts and washers. IMPORTANT: Mount to the most rigid surface available.
Mounting Dimensions
There are 4 mounting holes in the plate. Use four 1/4 bolts to secure the plate to the vehicle.
Note: Drawing not to scale.
176mm
6.99”
76mm 2.99”
100mm 3.94”
200mm
7.87”
4 - 24