![](/images/backgrounds/160496/160496-27059x1.png)
Mounting Dimensions
Note: Drawing not to scale.
| 1 | 1. | 14.40 in / 359.2 mm | |
|
|
| ||
| 2 | 2. | 12.10 in / 307.3 mm | |
| 3. | 6.05 in / 153.6 mm | ||
| 4 | |||
|
|
| ||
| 3 | 4. | 1.02 in / 25.9 mm | |
|
| 5. | 3.38 in / 85.85 mm | |
5 | 9 | 6. | Vehicle Mount Footprint | |
| 8 | 7. | 0.406 in / 10.312 mm | |
6 | 7 | 8. | 0.88 in / 22.3 mm | |
9. | 1.25 in / 31.75 mm | |||
|
|
If the Thor VM2 Quick Mount Smart Dock has a RAM ball attached, the RAM ball must be removed from the dock to use the U Bracket mount.
Remove the RAM ball. The hardware used to attach the RAM ball to the dock is not reused for the U bracket mount.
Step 3 - Attach Adapter BracketNote: For the steps below, always place the lock washer on the bolt before the flat washer.
1.Attach the Adapter Bracket to the Thor VM2 dock using four each M5x16mm bolt, M5 lock washer and M5 flat washer. Torque to 35 in/lbs (4.0 N/m).
2.Attach the Thor VM2/Adapter Bracket assembly to the U Bracket using 4 each
3.If the Thor VM2 is not already mounted to the dock, Place Thor VM2 in the Dock (page
4.Adjust the Thor VM2 to the desired viewing angle.
5.Torque the
4 - 31