![](/images/backgrounds/160496/160496-27080x1.png)
The optional external AC/DC power supply is for use in environments, such as an office, where DC power is not avail- able.
Note: The
In North America, this unit is intended for use with a UL Listed ITE power supply with output rated 10 – 60 VDC, minimum 15W. Outside North America, this unit is intended for use with an IEC certified ITE power supply with output rated 10 – 60 VDC, minimum 15W.
The external power supply may be connected to either a 120V, 60Hz supply or, outside North America, to a 230V, 50Hz supply, using the appropriate detachable cordset. In all cases, connect to a properly grounded source of supply provided with maximum 15 Amp overcurrent protection (10 Amp for 230V circuits).
AC Input Cable (US only)
DC Output Cable
To DC Output Cable | To Dock |
1.Connect the provided detachable cordset (US only, all others must order cable separately) to the external power supply (IEC 320 connector).
2.Plug cordset into appropriate, grounded, electrical supply receptacle (AC mains).
3.Connect the DC Output Cable end to the corresponding connector on the Adapter Cable.
4.Connect the watertight connector end of the Adapter Cable to the Thor VM2 Quick Mount Smart Dock Power Connector by aligning the connector pins to the power connector; push down on the watertight connector and twist it to fasten securely.
5.Press the Power Switch (page
6.Press the Power Button (page
4 - 52