MOTION

CIRCUITRY

+Vi

GND

3A fuse

To -Vo on vehicle, i.e. Negative

battery terminal

To pin 7 of COM1 or COM2

To pin 8 of COM1 or COM2

Note: The black and gray wire colors in the illustration only apply to the optional Honeywell Screen Blanking Box Cable, VM1080CABLE. The wire colors may be different in a user-supplied cable.

Screen Blanking with Switch

In applications where it is impractical to use the screen blanking box due to vehicle voltage or lack of a motion sensing signal, screen blanking can be controlled via a user supplied switch or relay that provides an electrical conductive connection on vehicle motion.

To pins 7 and 8

of COM1 or COM2

port on dock

Pins 7 and 8 must be connected as shown in the illustration above. No other pins are to be connected.

4 - 51