1

2

3

4

Manual duplex (special) heavy-media, card stock

For heavy media (card stock, etc.), use the straight-through output path.

1Adjust the paper-output lever to the down position.

2Access the printer properties. See “Printer properties (driver).” On the Finishing tab, click Manual Duplex (special), and then click OK. Print the document.

3After side one has been printed, remove the remaining paper from the paper input tray and set it aside until after you finish your manual duplexing job.

4Gather up the printed pages from side one, flip the stack, and then straighten the stack before placing it back in the paper input tray. Once reloaded, page one should be oriented upside down and located closest to the front of the printer. (The printed side should be facing toward the back of the printer.)

Click OK (on screen), and then wait for the pages to print.

EN

Printing on both sides of the paper (manual duplexing) 39