Security

In this section:

Using the Security Slot

Power-On Password

Pressing the F9 key at any point within the set-up returns your Notebook to the default settings.

Using the Security Slot

To use the security slot found on the rear corner of your Notebook, complete the following steps:

1.Insert a locking device (such as a Kensington lock) into the security slot.

2.Turn the locking device clockwise 90 degrees.

To remove the locking device, turn the locking device counter-clockwise 90 degrees and remove the device from the slot.

Power-On Password

You can set a power-on password that will secure the information you store on the hard disk. When turning on your Notebook, this password must be entered before you can access your files.

Setting the Password

To set the power-on password, complete the following steps:

1.Press the Power ª button to turn on your Notebook.

2.After the Compaq logo is displayed, a cursor is shown in the upper right corner of the screen for a few seconds. While the cursor is visible, press the F10 key.

Caution: F10 Set-up is for experienced users only. Changing settings may affect the functionality of your Notebook.

PRESARIO NOTEBOOK BEYOND SET-UP GUIDE

USING YOUR NOTEBOOK 3-13

1200 SERIES

 

Page 38
Image 38
HP 1215EA manual Using the Security Slot, Power-On Password, Setting the Password