3.From the Main option on the menu bar, use your arrow keys to move to Set Supervisor Password and press the Enter key.

4.Set your personal password, and press the Enter key. You must confirm the password and press the Enter key again.

Caution: Write your password down in a secure location. If you forget or lose your password, a Compaq service technician must reset your Notebook for you to be able to access your files.

5.Press the Enter key at the Set-up Notice screen to continue.

6.Move to Password on boot. Using the + or - keys to select Enabled.

7.Use the arrow keys to select Exit from the menu bar.

8.Make sure that Exit Saving Changes is selected. Press the Enter key.

9.Select Yes to save your changes and exit.

Your power-on password is now set. Every time you turn on your Notebook, resume working from hibernation mode, or access F10 Set-up, you must enter this password.

Removing the Password

To remove a power-on password, complete the following steps:

1.Press the Power ª button to turn on your Notebook.

2.Access F10 Set-up as above, type your current password, and press the Enter key.

3.From the Main option on the menu bar, use your arrow keys to move to Set Supervisor Password and press the Enter key.

4.Type your current password and press the Enter key.

3-14 USING YOUR NOTEBOOK

PRESARIO NOTEBOOK BEYOND SET-UP GUIDE

 

1200 SERIES

Page 39
Image 39
HP 1215EA manual Removing the Password