Insert and Remove Discs

This section covers:

Inserting a Disc

Removing a Disc

Manually Ejecting a Disc

5-2 USING THE CD OR DVD DRIVE

Inserting a Disc

To load a disc into the disc drive, complete the following steps:

Caution: Improper handling of a CD or DVD can damage the disc and could potentially damage the drive.

1.Press the Eject button located on the front of the drive.

2.Remove a disc from its protective case, holding the disc by its centre hole and outer edge to avoid touching the surface.

3.Place the disc, label side up (unless it is a double-sided DVD), into the round area of the tray. Gently press the disc down onto the centre spindle of the tray until the disc snaps into place.

Caution: Before closing the disc tray, ensure that the disc snaps onto the spindle in the centre of the tray. You can damage the disc and your Notebook if the disc is not seated properly.

4.Push the tray back into the drive until the drive locks into place.

PRESARIO MOBILE INTERNET PC

1400 SERIES

Page 51
Image 51
HP 14XL455 manual Insert and Remove Discs, Inserting a Disc