13.Set the cage down and slide it left to engage the clips on the chassis beneath the cage.
Be sure the cage latch slides over and engages the chassis tab to lock the hard drive cage in place.
14.Connect the power cable and data cable to the back of the hard drive.
15.Connect the opposite end of the data cable to the SATA1 connector on the system board.
16.Replace the slim optical disc drive. For instructions, go to Installing a slim optical disc drive on page 19.
17.Replace the access panel.
18.Reconnect the power cord and turn on the computer.
19.Lock any security devices that were disengaged when the access panel was removed.
24 Chapter 5 Removal and replacement procedures