3.Locate the DIMM sockets.
4.Open both latches of the memory module socket (1), and insert the memory module into the socket (2).
NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.
5.Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3).
6.Repeat steps 7 and 8 to install an additional module.
7.Replace the access panel.
8.Reconnect the power cord and turn on the computer.
9.Lock any security devices that were disengaged when the access panel was removed.
The computer automatically recognizes the additional memory when you turn on the computer.
28 Chapter 5 Removal and replacement procedures