Front bezel

To remove the front bezel:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 14).

2.Remove the access panel (see Access panel on page 15).

3.Disconnect the gray cables from the system board connectors labeled F AUDIO and F SS USB.

4.Disconnect the two blue and white and one orange and white cables from the connector labeled F PANEL.

5.Lift the two tabs (1) that secure the bezel to the computer.

6.Rotate the top of the bezel downward and away from the computer (2), and then remove the bezel from the computer (3) while guiding the cables through the front of the chassis.

To install the front bezel, reverse the removal procedures.

The two blue and white cables and one orange and white cable must be plugged into the F_PANEL connector in a specific order, as follows:

Front bezel 25

Page 33
Image 33
HP 402 G1 manual Front bezel, To remove the front bezel