HP 5000 manual JAM RECOVERY= Auto, Reforming=On, Maintenance OFF, Message=Off, Small Paper Normal

Configuration Menu (Continued)

Item	Values	Explanation
JAM RECOVERY=	AUTO	Determine how the printer behaves when a
AUTO	ON	paper jam occurs.
	OFF	AUTO: The printer automatically selects the
		best mode for printer jam recovery (usually ON).
		This is the default setting.
		ON: The printer automatically reprints pages
		after a paper jam is cleared.
		OFF: The printer does not reprint pages
		following a paper jam. Printing performance
		might be increased with this setting.
PAPER REFORMING=	OFF	Paper reforming has two main purposes:
OFF	ON	1. To reduce jams, wrinkles, and bent corners
		when printing on both sides of a sheet of
		paper (duplexing).
		2. To reduce bent corners and wrinkles when
		printing on one side of a sheet of narrow
		media (such as legal, rotated letter, or
		rotated A4).
		Print speed will be slower when PAPER
		REFORMING=ON.
MAINTENANCE	OFF	This item appears only after the PERFORM
MESSAGE=OFF		PRINTER MAINTENANCE message displays.
		OFF: The PERFORM PRINTER MAINTENANCE
		message will be cleared and will not be
		displayed again until the next maintenance is
		due.
		The message should not be turned off unless
		the printer maintenance has been performed.
		If the required maintenance is not performed,
		the printer’s performance will degrade.
SMALL PAPER	NORMAL	Select SLOW when alternately printing
SPEED=NORMAL	SLOW	envelopes or small paper and standard paper
		sizes.
		Be sure to return the speed to NORMAL when
		finished.

B-14 Control Panel Menus

EN