HP 5000 manual Cfg Tcp/Ip=No, Cfg Etalk=No, Control Panel Menus B-19

EIO Menu (Continued)

Item	Values	Explanation
CFG TCP/IP=NO	NO	NO: The TCP/IP Menu is not accessible.
	YES	YES: The TCP/IP Menu appears. In the TCP/IP
		Menu, you can specify BOOTP=YES for TCP/IP
		parameters to be automatically loaded from a
		bootp or DHCP server when the printer is
		turned on. If you specify BOOTP=NO, you can
		manually set selected TCP/IP parameters from
		the control panel. You can manually set each
		byte of the IP address (IP), Subnet Mask (SM),
		Syslog Server (LG), and Default Gateway
		(GW). Also, you can manually set the Timeout
		time period.
		Note
		If no IP address is assigned within the first 5
		minutes, the HP JetDirect print server card will
		assume a default IP address of 192.0.0.192.
CFG ETALK=NO	NO	NO: The EtherTalk Menu is not accessible.
	YES	YES: The EtherTalk Menu appears. In the
		EtherTalk Menu you can set the AppleTalk
		phase parameter (ETALK PHASE=1 or 2) for
		your network.

EN

Control Panel Menus B-19