HP 7000 Sheet-feed manual Scanner lamp setting

(continued)
Icon	Button name	Description
2	OK/Select	Allows you to scroll the list of scan profiles, view
		their details, and specify the number of
		copies.
		•	Press	and	to scroll through profiles
			or specify number of copies.
		• Press OK to view scan profile details,
			return to the list of profiles when viewing
			scan profile details, and to specify the
			number of copies for a copy profile.
3	Scan Simplex	Starts a one-sided scan or copy.
4	Scan Duplex	Starts a two-sided scan or copy.
5	Tools	Opens the HP Scanner Tools Utility where you
		can perform the following tasks:
		• Configure the list of profiles on the scanner
			front panel
		• Create scan profiles that use third-party
			scanning software
		• View information about scanner settings,
			status, and maintenance
6	Cancel	Cancels a scan or copy in progress.
7	Back	Returns you to the list of profiles when you are
		viewing profile details or specifying number of
		copies for a copy profile. Pressing				when
		specifying number of copies cancels your
		selection.

NOTE: For information about status and error messages, see the troubleshooting information in the scanner User Guide.

English

Scanner lamp setting

The scanner supports two modes of lamp operation:

•In Power Save mode, the scanner lamp times out and turns off automatically after about 15 minutes of inactivity. If the scanner lamp has turned off and you want to scan, either press the Power Save button or load originals into the document feeder.

•In Instant Lamp On mode, the scanner lamp times out and turns off automatically after about 15 minutes of inactivity, but it remains warm and ready to scan.

To switch from Power Save mode to Instant Lamp On mode, select the Enable Instant Lamp On check box on the Settings tab of the HP Scanner Tools Utility. To switch back to Power Save mode, clear the Enable Instant Lamp On check box.

Scanner overview 9