HP 800 G1 21.5 Non-Touch manual Hard drive and optical drive cables and connectors

Hard drive and optical drive cables and connectors

Description	Spare part number
Optical drive cable (data and power assembly)	698221-001
Hard drive cable (data and power assembly)	698215-001

The hard drive and optical drive connectors are located near the middle of the computer, partially under the main display bracket. Each connector is secured with two Torx screws and has two cables that connect to the system board.

The optical drive connector cables are longer than the hard drive connector cables.

To remove the hard drive or optical drive connector:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 35).

2.Remove the access panel (see Access panel on page 39).

3.Remove the stand (see Stand on page 41).

4.Remove the lower panel (see Lower panel on page 44).

5.Remove the side panels (see Side panels on page 82).

6.Remove the VESA mounting adapter (see VESA mounting adapter on page 45).

7.Remove the power supply (see Power supply on page 84).

8.Remove the system board (see System board on page 87).

9.Remove the front bezel (see Front bezel on page 100).

10.Remove the display panel (see Display panel on page 105).

108 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis