Adjusting the height-adjustable/recline stand (optional)

This stand allows you to:

adjust the computer height 110 mm (4.3 inches)

rotate the computer position from landscape to portrait

recline the computer backward up to +60 degrees

tilt the computer to 30 degrees from the desktop

swivel the computer up to 360 degrees right or left

To rotate the computer:

1.Grasp the computer by the sides and lift it straight up (1) to its highest position.

2.Press the top of the computer backwards (2).

CAUTION: The computer must be raised and tilted to provide clearance for rotating it.

3.Grasp the top right and bottom left of the computer and carefully turn it counterclockwise (3) until it is in the portrait position (4).

WARNING! If the height-adjustable/recline stand is installed, before laying the computer down for service, first grasp the sides of the display and raise the display to the highest position.

Do not lay the computer down with the sliding stand in the low position. The stand may suddenly release, which could cause injury or damage to equipment.

6 Chapter 1 Product features

Page 16
Image 16
HP 800 G1 21.5 Non-Touch manual Adjusting the height-adjustable/recline stand optional