HP 800 G1 21.5 Non-Touch manual

6.Remove the VESA mounting adapter (see VESA mounting adapter on page 45).

7.Remove the power supply (see Power supply on page 84).

8.Remove the speakers (see Speakers on page 79).

9.Remove the side panels (see Side panels on page 82).

10.Remove the front bezel (see Front bezel on page 100).

11.Disconnect the backlight cable from the display panel.

NOTE: Replace the backlight cable with the new backlight cable that comes with the new display panel kit.

Remove the backlight cable from the defective panel before sending the panel back to the supplier.

12.Remove the four Torx screws that secure the display panel to the frame.

13.Lift the display panel from the frame.

106 Chapter 5 Removal and Replacement Procedures All-in One (AIO) Chassis