HP 800 G1 21.5 Non-Touch manual Out of memory error Cause Solution

NOTE: The memory count will be affected by configurations with the Management Engine (ME) enabled. The ME uses 8MB of system memory in single channel mode or 16MB of memory in dual- channel mode to download, decompress, and execute the ME firmware for Out-of-Band (OOB), third- party data storage, and other management functions.

System will not boot or does not function properly after installing additional memory modules.

Cause	Solution
A memory module is not installed in the DIMM1 or XMM1	Ensure that a memory module is installed in the DIMM1 or
socket.	XMM1 socket on the system board. This socket must be
	populated with a memory module.
Memory module is not the correct type or speed grade for the	Replace module with the correct industry-standard device for
system or the new memory module is not seated properly.	the computer. On some models, ECC and non-ECC memory
	modules cannot be mixed.
Out of memory error.
Cause	Solution

You have run out of memory to run the application.

Check the application documentation to determine the memory requirements.

Memory count during POST is wrong.

Cause	Solution
The memory modules may not be installed correctly.	Check that the memory modules have been installed correctly
	and that proper modules are used.
Integrated graphics may use system memory.	No action required.
Insufficient memory error during operation.
Cause	Solution
Too many Terminate and Stay Resident programs (TSRs) are	Delete any TSRs that you do not need.
installed.
You have run out of memory for the application.	Check the memory requirements for the application or add
	more memory to the computer.

Solving memory problems 157