HP 800 G1 21.5 Non-Touch manual Removal and Replacement Procedures All-in One AIO Chassis

5Removal and Replacement Procedures All-in One (AIO) Chassis

The following sections provide information about disassembling various components of the computer.

NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions.

Preparing to disassemble the computer

To avoid injury and equipment damage, always complete the following steps in order, when opening the HP Pro All-in-One.

1.Remove all media from the computer.

2.Shut down the computer.

3.After the system has completely shut down, disconnect the power adapter from the back of the computer.

4.Disconnect all other attached cables from the back of the computer.

Preparing to disassemble the computer 35