Selecting the Display Language

Use the printer control panel to set the printer to display printer messages and print configuration pages in a variety of supported languages.

To select the printer control panel language

1Hold down [Select] while turning the printer on (power button in). CONFIG LANGUAGE (in English) appears on the printer control panel display for approximately one second. Once the printer has restarted, LANGUAGE = ENGLISH will appear on the display.

N o t e

Only [–]Value]+], [Select], and [Go] are active while the display

 

language is being configured. All other keys are ignored.

 

If you press [Go] without selecting a language, the printer will bring

 

itself online and all subsequent messages will be displayed in English.

 

However, since no display language was selected, the LANGUAGE =

 

ENGLISH message will reappear (after the power-on self test) when the

 

printer is next turned on. This message will be displayed every time the

 

printer is turned on until you select a language through the configure

 

language mode.

 

 

2Press [–]Value]+]until the language you want appears on the display.

3Press [Select] to save the selection.

An asterisk (*) appears to the right of the selection. The language selected will be the default language until another selection is made by restarting the printer in the configure language mode.

4Press [Go].

5Turn the printer off (power button out).

EN

Step 5: Changing the Printer Control Panel Overlay and Language (Optional) 17