To install the imaging drum
N o t e
Make sure that the printer is off (power button out) before installing the imaging drum.
1Open the front door of the printer (A). Swing the upper (blue) lever to the right (B). Press the white button on the lower (green) lever and swing the lever to the right (C).
2Remove the imaging drum from its packaging.
C a u t i o n
There is a cover (D) protecting the drum’s cylinder. Do not remove this cover or the drum might be damaged; it will come off when you perform step 3, below.
3Push the drum into the printer. The protective cover will slide off as the drum enters the printer. Set the cover aside.
4Swing the lower (green) lever back to the left, making sure it clicks into place.
N o t e
If the lever does not return to its original position, make sure that the imaging drum is all the way in the printer.
EN
Step 6: Installing the Consumables 19