HP E1459A DISPlay:MONitor Subsystem, DISPlay:MONitor:PORT <port

DISPlay:MONitor Subsystem

The DISPlay:MONitor subsystem turns on the monitor mode. Parameters related to the state of the data and control lines are shown on an external terminal1. Refer to the Command Module’s Users’s Guide for supported terminal types. The DISPlay:MONitor commands do not apply to any C-SCPI or VXIplug&play driver implementation. The parameters displayed are:

Syntax	DISPlay:MONitor
	:PORT <port>	page 43
	:PORT? [MINimum MAXimum DEFault]	page 44
	:PORT:AUTO <state>	page 44
	:PORT:AUTO?	page 44
	[:STATe] <state>	page 45
	[:STATe]?	page 45

DISPlay:MONitor:PORT <port>

Sets the value of the DISPlay:MONitor:PORT or sets the automatic display mode.

Parameters


Parameter Name	Parameter Type	Range of Values	Default

<port>	numeric or discrete	0, 1, 2, 3, AUTO, MINimum, MAXimum,	AUTO
		DEFault

Comments • Sets the value of the Display Monitor to Port 0, 1, 2, or 3. AUTO automatically displays the results of a MEAS:DIG:DATAn? command whenever that command is executed for the monitored Port if the display monitor is active for the Port. MINimum or DEFault sets the value for the monitored Port to 0. MAXimum sets the value for the monitored Port to 3.

•Specifying either 0, 1, 2, 3, MIN, MAX, or DEF turns the AUTO mode off.

•*RST Condition: sets the display Port to 0 and the automatic display mode ON.

Example DISP:MON:PORT2	Display data from port 2
DISP:MON:PORT AUTO	Set automatic display mode

1.The display monitor is an RS-232 Terminal attached to an HP E1405B, E1406, or E1306 Command Module and provides an interactive user interface to the HP E1459A.

HP E1459A SCPI Command Reference 43

Contents

Contents Page Page Page Page Page Page Page BUSINESS REPLY MAIL HEWLETT-PACKARDCOMPANY Page Installing and Configuring the HP E1459A Functional Description Page Page Watchdog Timer Input Level Selection Input Isolation Input Debounce Processing Input Edge Detection Page Input Data Capture Front Panel Markers Interrupt Driven or Polled Mode Operations Interrupt Parsing Configuring for Installation Setting the Logical Address Setting the Interrupt Priority Setting Input Threshold Levels Setting the Reset Time on the Connecting User Inputs Page Installing the HP E1459A in a VXIbus Mainframe Terminal Block Wiring a Terminal Block Page Page Using the HP E1459A Module Power-on /Reset States Example 1: Reset, Self Test and Module ID Page Digital Input Example 2: Digital Input Page Edge Detected Event Detection Page Page Example 3: Edge Interrupt Page HP E1459A SCPI Command Reference Common Command Format SCPI Command Format Command Separator Abbreviated Commands Implied Commands Command Parameters Linking Commands DIAGnostic:SYSReset Subsystem DIAGnostic:SYSReset[:STATe] DIAGnostic:SYSReset:ENABle <state DIAGnostic:SYSReset:ENABle DISPlay:MONitor Subsystem DISPlay:MONitor:PORT <port DISPlay:MONitor:PORT? [MINimum | MAXimum | DEFault] DISPlay:MONitor:PORT:AUTO <state DISPlay:MONitor:PORT:AUTO DISPlay:MONitor[:STATe] <state DISPlay:MONitor[:STATe] INPut Subsystem INPutn:CLOCk[:SOURce] <source INPutn:CLOCk[:SOURce] INPutn:DEBounce:TIME <time> | MINimum | MAXimum | DEFault INPutn:DEBounce:TIME? [MINimum | MAXimum | DEFault] MEASure Subsystem MEASure:DIGital:DATAn[:type] [:VALue] MEASure:DIGital:DATAn[:type]:BITm MEMory Subsystem MEMory:DELete:MACRo <name SENSe Subsystem [SENSe:]EVENt:PORTn:DAVailable [SENSe:]EVENt:PORTn:DAVailable:ENABle <state [SENSe:]EVENt:PORTn:DAVailable:ENABle [SENSe:]EVENt:PORTn:EDGE [SENSe:]EVENt:PORTn:EDGE:ENABle <state [SENSe:]EVENt:PORTn:EDGE:ENABle [SENSe:]EVENt:PORTn:NEDGe [SENSe:]EVENt:PORTn:NEDGe:ENABle <mask [SENSe:]EVENt:PORTn:NEDGe:ENABle [SENSe:]EVENt:PORTn:PEDGe [SENSe:]EVENt:PORTn:PEDGe:ENABle <mask [SENSe:]EVENt:PORTn:PEDGe:ENABle [SENSe:]EVENt:PSUMmary:DAVailable [SENSe:]EVENt:PSUMmary:EDGE STATus Subsystem Page STATus:OPERation:CONDition STATus:OPERation:ENABle <mask STATus:OPERation:ENABle STATus:OPERation[:EVENt] STATus:OPERation:PSUMmary:CONDition STATus:OPERation:PSUMmary:ENABle <mask STATus:OPERation:PSUMmary:ENABle STATus:OPERation:PSUMmary[:EVENt] STATus:PRESet STATus:QUEStionable:CONDition STATus:QUEStionable:ENABle <mask STATus:QUEStionable:ENABle STATus:QUEStionable[:EVENt] SYSTem Subsystem SYSTem:CDEScription? <number SYSTem:CTYPe? <number SYSTem:ERRor SYSTem:VERSion IEEE 488.2 Common Commands Command Quick Reference Page HP E1459A Specifications Page HP E1459A Register Definitions Overview Addressing the Registers Register Access with Logical Address with Memory Register Definitions Status/Control Register Page Edge Interrupt Status Register Data Available Status Register Control/Status Register Command Register Port 0/2 Page Channel Data Register Port 0/2 Positive Edge Detect Register Port Negative Edge Positive Mask Register Port 0/2 Negative Mask Register Port 0/2 Debounce Clock Register Port 0 and Port1/ Port 2 and Port Command Register Port 1/3 Channel Data Register Port 1/3 Positive Mask Register Port 1/3 Negative Mask Register Port 1/3 Port 1/ Port 2 and Page Power On/Reset Conditions Programming Examples Output and Edge Detection Examples Page Page Page Page Page Page Page Page Page Page Page Page Error Messages Page Index