DISPlay:MONitor[:STATe] <state>
Turns the Display Mode on or off.
Parameters
|
|
|
|
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
<state> | Numeric or discrete | 0 1 OFF ON | OFF |
|
|
|
|
|
|
|
|
Comments • DISP:MON ON enables the terminal display of Port parameters. The parameters are updated to the terminal following each new command accessing a Port.
•The displayed data is in the format:
--Displayed port number: 0, 1, 2, or 3
--Size of the data:
--Actual data: signed decimal and hexadecimal
•A keyboard entry at the terminal sets DISP:MON OFF.
•*RST Condition: OFF.
Example DISP:MON ON | turns the display mode on. |
DISPlay:MONitor[:STATe]?
Returns the value of the Display Monitor State as either 0 (for OFF) or 1 (for ON).
Parameters None
Comments • DISP:MON[:STAT]? returns a 1 if the monitor mode is on; or returns a 0 if the monitor mode is off.
Example DISP:MON?
HP E1459A SCPI Command Reference 45