[SENSe:]EVENt:PORTn:EDGE:ENABle?
Returns the state of the Edge Event Enable for Port n as a (unsigned) 0 or a 1.
Parameters
|
|
|
|
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
PORTn | numeric | 0, 1, 2, 3 (PORT = PORT0) | PORT0 |
|
|
|
|
|
|
|
|
Comments • A 0 means the Edge Event is not enabled; a 1 means it is enabled.
[SENSe:]EVENt:PORTn:NEDGe?
Returns the value of the Negative Edge Detect Register for all 16 bits of Port n.
Parameters
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
PORTn | numeric | 0, 1, 2, 3 (PORT = PORT0) | PORT0 |
|
|
|
|
|
|
|
|
Comments • The value returned is in the range of
•When an edge event is detected, the Edge Detect Status is set true. Refer to the [SENSe:]EVENt:PSUM:EDGE? and [SENSe:]EVENt:PORTn:EDGE? commands.
•Reading this register for all events that have occurred will clear the event detector register.
•*RST Condition: disables the Edge Event.
HP E1459A SCPI Command Reference 55