[SENSe:]EVENt:PORTn:PEDGe:ENABle?
Returns the decimal value of the Positive Edge Detection Mask as a 16 bit integer.
Parameters
|
|
|
|
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
PORTn | numeric | 0, 1, 2, 3 (PORT = PORT0) | PORT0 |
|
|
|
|
|
|
|
|
Comments • Returns a number in the range of
•Each bit enables the corresponding channel positive edge detect mask for Port n. A 1 means the mask is enabled for that bit, a 0 means the mask is disabled for that bit.
•*RST Condition: clears the mask (no enabled bits).
[SENSe:]EVENt:PSUMmary:DAVailable?
Returns the status of the DAVailable Event for ALL ports as a 16 bit integer.
Parameters None
Comments • The value returned is in the range of +0 to +15 and is the sum of the following values:
Value Returned | Meaning |
|
|
|
|
0 | No Event occurred in any port |
|
|
1 | A DAV event occurred in Port 0 |
|
|
2 | A DAV event occurred in Port 1 |
|
|
4 | A DAV event occurred in Port 2 |
|
|
8 | A DAV event occurred in Port 3 |
|
|
|
|
•This command is similar to the [SENSe:]EVENt:PORTn:DAV? command except that this command returns the status for all ports.
Example If the EVEN:PSUM:DAV? command returns a value of 5 it indicates a DAV event occurred on Ports 0 and 2 (values 1 and 4 respectively, see table).
58 HP E1459A SCPI Command Reference