[SENSe:]EVENt:PORTn:NEDGe:ENABle <mask>
Sets the Negative Edge Detection Mask for Port n.
Parameters
|
|
|
|
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
PORTn | numeric | 0, 1, 2, 3 (PORT = PORT0) | PORT0 |
<mask> | numeric | 0 | |
|
|
|
|
|
|
|
|
Comments • Each bit enables the corresponding channel negative edge detect for Port n. A 1 means the mask is enabled for that bit, a 0 means the mask is disabled for that bit.
•*RST Condition: clears the mask (no enabled bits).
Example EVEN:PORT 1:NEDG:ENAB 32767 | Enables Negative Edge Event Detection |
| on all bits of Port 1 |
[SENSe:]EVENt:PORTn:NEDGe:ENABle?
Returns the decimal value of the Negative Edge Detection Mask as a 16 bit integer.
Parameters
|
|
|
|
Parameter Name | Parameter Type | Range of Values | Default |
|
|
|
|
PORTn | numeric | 0, 1, 2, 3 (PORT = PORT0) | PORT0 |
|
|
|
|
|
|
|
|
Comments • Returns a number in the range of
•Each bit enables the corresponding channel negative edge detect mask for Port n. A 1 means the mask is enabled for that bit, a 0 means the mask is disabled for that bit.
•*RST Condition: clears the mask (no masked bits).
56 HP E1459A SCPI Command Reference