
Command Quick Reference
Command Subsystem | Description | See Also |
|
|
|
DIAG:SYSR:STAT? | Returns the value of the Watchdog Timer state (1=asserted, 0=not asserted). | |
:ENAB <state> | Turns the Watchdog Timer ON or OFF. | |
:ENAB? | Returns the enabled state of the Watchdog Timer as either a +1, or +0. | |
|
|
|
DISP:MON:PORT <port> | Sets display monitor port (channel) or automatic mode. | |
:MON:PORT? [MIN MAX DEF] | Returns the port (channel) number of the current display. | |
:MON:PORT:AUTO <state> | Sets the automatic mode for the Display Monitor on or off. | |
:MON:PORT:AUTO? | Returns the state of the automatic display mode; either +0 or +1. | |
:MON[:STAT] <state> | Turns the Display mode on or off. | |
:MON[:STAT]? | Returns the value of the Display Monitor State; +0 (OFF) or +1 (ON). | |
|
|
|
INPn:CLOC[:SOUR] EXT INT | Specifies the input circuitry clock source for Port n. | |
:CLOC[:SOUR]? | Returns the programmed value of the input clock source for Port n. | |
:DEB:TIM <time> MIN MAX DEF | Programs the channel input debounce time for Port n. | |
:DEB:TIM? [MIN MAX DEF] | Returns the current debounce time as a floating point number. | |
|
| |
|
|
|
MEAS:DIG:DATAn[:type][:VAL]? | Returns contents of Current Value Register(s) for the specified Port n. | |
:DIG:DATAn[:type]:BITm? | Returns value of BIT m of Channel Data Register for specified Port n. | |
|
|
|
MEM:DEL:MACR <name> | Deletes the MACRO command defined by the name <name>. | |
|
|
|
[SENS:]EVEN:PORTn:DAV? | Returns status of DAVailable Event for Port n as either +0 or +1. | |
:PORTn:DAV:ENAB <state> | Enables Data Available interrupt into Port n by EXT clock source. | |
:PORTn:DAV:ENAB? | Returns state of DAVailable Event Enable for Port n as either +0 or +1. | |
:PORTn:EDGE? | Returns status of Edge Detect Event for Port n as either +0 or +1. | |
:PORTn:EDGE:ENAB <state> | Enables / disables an edge event interrupt for Port n. | |
:PORTn:EDGE:ENAB? | Returns state of the Edge Event Enable for Port n as a signed integer. | |
:PORTn:NEDG? | Returns value of Negative Edge Detect Register for 16 bits of Port n. | |
:PORTn:NEDG:ENAB <mask> | Sets the Negative Edge Detection Mask for Port n. | |
:PORTn:NEDG:ENAB? | Returns value of Negative Edge Detection Mask as a 16 bit integer. | |
:PORTn:PEDG? | Returns value of Positive Edge Detect Register for 16 bits of Port n. | |
:PORTn:PEDG:ENAB <mask> | Sets the Positive Edge Detection Mask for Port n. | |
:PORTn:PEDG:ENAB? | Returns value of the Positive Edge Detection Mask as a 16 bit integer. | |
:PSUM:DAV? | Returns status of DAVailable Event for ALL ports as a 16 bit integer. | |
:PSUM:EDGE? | Returns the status of the edge events for ALL ports. | |
|
|
|
STAT:OPER:COND? | Returns value of Operation Status Condition Register as 16 bit int. | |
:OPER:ENAB <mask> | Sets the value of the OPERation Status Enable Register. | |
:OPER:ENAB? | Returns value of OPERation Status Enable Register as 16 bit integer. | |
:OPER[:EVEN]? | Returns value of OPERation Status Event Register as 16 bit integer. | |
:OPER:PSUM:COND? | Returns value of OPERation Status Port Condition Register as 16 bit int. | |
:OPER:PSUM:ENAB <mask> | Sets the value of the OPERation Status Port Enable Register. | |
:OPER:PSUM:ENAB? | Returns value of Operation Status Port Enable Register as 16 bit integer. | |
:OPER:PSUM[:EVEN]? | Returns value of Operation Status Port Event Register as 16 bit integer. | |
:PRES | Presets the Status system registers and conditions. | |
:QUES:COND? | Returns value of Questionable Status Condition Register as 16 bit int. | |
:QUES:ENAB <mask> | Sets the value of the QUEStionable Status Enable Register. | |
:QUES:ENAB? | Returns value of QUEStionable Status Enable Register as 16 bit integer. | |
:QUES[:EVEN]? | Returns value of QUEStionable Status Event Register as 16 bit integer. | |
|
|
|
SYST:CDES? <number> | Returns the module description. | |
:CTYP? <number> | Returns the module card type. | |
:ERR? | Queries the error register for error value and string to identify the error. | |
:VERS? | Returns the SCPI version to which this module complies. | |
|
|
|
HP E1459A SCPI Command Reference 71