HP 800 G1 E3T09UT#ABA, E1Z84UT E1Z84UT#ABA, 800 G1 E1Z89UTABA, 800 G1 E1Z88UT#ABA, 800 G1 E1Z82UT#ABA

4.Remove the power cables from the clip on the base pan.

5.From the outside, rear of the chassis, remove the four silver Torx T15 screws that connect the power supply to the chassis.

6.Press the tab (1) on the base pan in front of the power supply that holds it in place.

90 Chapter 5 Removal and replacement procedures: Tower (TWR)