HP 800 G1 E1Z89UTABA, E1Z84UT E1Z84UT#ABA, 800 G1 E3T09UT#ABA Troubleshooting without diagnostics

Table 9-2Solving Network Problems (continued)

Wake-on-LAN feature is not functioning.

Cause	Solution
S5 Wake on LAN is disabled (some models).	Enable the S5 Wake on LAN option in Computer Setup.
	Select Advanced > Device Options > S5 Wake on
	LAN.
Wake-on-LAN is not enabled.	To enable Wake-on-LAN in Windows 7:
	1.	Select Start > Control Panel > Network and
		Sharing Center.
	2.	Under Tasks, select Manage network
		connections.
	3.	Click Local Area Connection.
	4.	Click the Properties button.
	5.	Click the Configure button.
	6.	Click the Power Management tab, then select
		Allow this device to wake the computer.
	To enable Wake-on-LAN in Windows 8:
	1.	From the Start screen, type c, and then select Control
		Panel from the list of applications.
	2.	Select Network and Sharing Center, and then click
		the Ethernet link next to the connection.
	3.	Click the Properties button.
	4.	Click the Configure button.
	5.	Click the Power Management tab, then enable the
		appropriate Wake-on LAN option.

224 Chapter 9 Troubleshooting without diagnostics