Speaker

Description

Spare part number

 

 

Speaker

727149-001

 

 

The speaker is attached to the front of the chassis under the rotating drive cage.

1.Prepare the computer for disassembly (Preparation for disassembly on page 94).

2.Remove the access panel (Access panel on page 95).

3.Remove the front bezel (Front bezel on page 96).

4.Rotate the drive cage to its upright position.

5.Disconnect the speaker wire from the white system board connector labeled SPKR.

6.Remove the two Torx screws that secure the speaker to the chassis.

7.Lift the speaker from the inside of the chassis to remove it.

To install the speaker, reverse the removal procedures.

134

Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)

Page 146
Image 146
HP 800 G1 E1Z89UTABA, E1Z84UT E1Z84UT#ABA, 800 G1 E3T09UT#ABA manual Description Spare part number Speaker 727149-001