4.If you are installing an optical drive, install four M3 metric guide screws (not provided) in the lower holes on each side of the drive.

NOTE: When replacing an optical drive, transfer the four M3 metric guide screws from the old drive to the new one.

CAUTION: Use only 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive.

5.Slide the drive into the drive bay, making sure to align the guide screws with the guide slots, until the drive snaps into place.

6.Connect the power cable and data cable to the rear of the optical drive.

Drives 63

Page 75
Image 75
HP E1Z84UT E1Z84UT#ABA, 800 G1 E1Z89UTABA, 800 G1 E3T09UT#ABA, 800 G1 E1Z88UT#ABA, 800 G1 E1Z82UT#ABA manual