HP 800 G1 E1Z89UTABA, E1Z84UT E1Z84UT#ABA manual Solving media card reader problems 209

Do not know how to remove a media card correctly.

Cause	Solution
The computer’s software is used to safely eject the card.	In Windows 7, click Start, select Computer, right-click on
	the corresponding drive icon, and then select Eject. Pull the
	card out of the slot.
	In Windows 8, on the Start screen, type e, and then click File
	Explorer from the list of applications. Expand Computer,
	right-click on the corresponding drive icon, and then select
	Eject. Pull the card out of the slot.
	NOTE: Never remove the card when the green LED is
	flashing

After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the computer.

Cause Solution

The operating system needs time to recognize the device if the reader was just installed into the computer and you are turning the PC on for the first time.

Wait a few seconds so that the operating system can recognize the reader and the available ports, and then recognize the media inserted in the reader.

After inserting a media card in the reader, the computer attempts to boot from the media card.

Cause	Solution
The inserted media card has boot capability.	1.	If you do not want to boot from the media card, remove
		it during boot or do not select the option to boot from the
		inserted media card during the boot process.
	2.	During POST (Power On Self-Test), press F9 to modify the
		boot menu.
	3.	Change the boot sequence in F10 Computer Setup.

Solving media card reader problems 209