ÄCAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.
5.Remove the four Phillips PM2.5×7.0 screws 1 that secure the display assembly to the computer.
6.Lift the display assembly 2 straight up and remove it.
7.If it is necessary to replace the display enclosure or any of the display assembly internal components, remove the rubber screw covers 1 and the four Phillips PM2.5×7.0 screws 2 on the display bezel lower edge.
Removal and replacement procedures |
