HP M23 Using the Self-Timer Settings, Secure the camera to a tripod or set it on a stable surface

5.Continue adding more pictures to the panorama, or press

the button to end the panoramic sequence. The panoramic sequence ends automatically after you take the fifth picture.

6.After you have completed the panorama sequence, you can delete it during Instant Review by pressing the

button, then selecting Entire Panoramic Sequence in the Delete sub-menu.

To preview the combined panoramic sequence on your camera, see Preview Panorama on page 73.

NOTE: The Panorama shooting mode requires the full version of the HP Image Zone software to automatically stitch images together on your computer (see Transferring Images to a Computer on page 87 and HP Image Zone Software on page 105).

Using the Self-Timer Settings

1.Secure the camera to a tripod or set it on a stable surface.

2.Press the Timer button until Self-Timer appears in the Image Display, then frame the subject (see page 31).

3.The next steps depend on whether you are capturing a still pictures or are recording a video clip.

For Still Pictures:

a.Press the Shutter button halfway down. The camera measures and then locks the focus and exposure. The camera will hold these settings until it takes the picture.

b.Press the Shutter button all the way down. A countdown appears on the screen and the Self-Timer/ Video light blinks for 10 seconds before the camera takes the picture.

46 HP Photosmart M22/M23 User’s Manual