LED control panel

a.Click the Start button, and then click the Programs item.

b.Click your HP product group, and then click the HP Device Toolbox item.

c.On the Systems tab, click Service.

LCD control panel

a.From the product control panel, press the Setup button.

b.Open the Service menu.

c.Use the arrow keys to select the Cleaning mode option, and then press the OK button.

The product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the page that prints.

Touchscreen control panel

a.From the Home screen on the product control panel, touch the Setup button.

b.Touch the Service menu.

c.Touch the Cleaning Page button.

d.Load plain letter or A4 paper when you are prompted.

e.Touch the OK button to begin the cleaning process.

The product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation. Wait until the process is complete. Discard the page that prints.

5.Print a configuration page to test the product.

LED control panel

a.Press and hold the Cancel button until the Ready light starts blinking.

b.Release the Cancel button.

LCD control panel

a.From the Home screen on the product control panel, touch the Setup button.

b.Touch the Reports menu.

c.Touch the Configuration Report button.

Touchscreen control panel

a.From the Home screen on the product control panel, touch the Setup button.

b.Touch the Reports menu.

c.Touch the Configuration Report button.

ENWW

Solve paper feed or jam problems 79