CLI commands

snmp-server allow

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server allow <ip address>/<mask>

Adds a host to the list of IP address from which access to the SNMP interface is permitted.

no snmp-server allow <ip address>/<mask>

Removes a host from the list of IP address from which access to the SNMP interface is permitted.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

snmp-server chassis-id

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server chassis-id <name>

Specifies a name to identify the AP. By default, this is set to the serial number of the AP.

no snmp-server chassis-id

Deletes the system name.

snmp-server contact

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server contact <email>

Specifies contact information.

no snmp-server contact

Deletes contact information.

Parameters

<email>

Email address.

snmp-server heartbeat period

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server heartbeat period <seconds>

Sets the interval between sending heartbeat traps.

Parameters

<seconds>

Heartbeat interval in seconds.

snmp-server location

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server location <name>

Specifies the location where the AP is installed.

no snmp-server location

Deletes location information.

2-20