CLI commands

access-controller restrict location

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

access-controller restrict location (gateway mac <mac address>)

Identifies the access controller the AP will communicate with.

Parameters

gateway

Use the default gateway as the service controller.

mac

Use the specified MAC address as the gateway.

<mac address>

MAC address. Specify 6 pairs of hexadecimal numbers separated by

 

colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01

service-sensor

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

service-sensor

Enables the service sensor. The service sensor polls a target device at present intervals. If the device does not respond, the radio is shut off.

no service-sensor

Disables the service sensor.

service-sensor

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

service-sensor (gateway address<ip address>)

Sets the target device the service sensor will poll. This can be the default gateway or a specific IP address.

no service-sensor

Disables the service sensor.

Parameters

gateway

The service sensor will poll the default gateway.

address

The service sensor will poll another device.

<ip address>

IP address of the other device. For example: 192.168.10.10

service-sensor poll

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

service-sensor poll <seconds>

Sets the poll frequency.

Parameters

<seconds>

Poll frequency. Range: 1 - 3600 seconds.

2-32