CLI commands

Port-2 interface context

Path: View > Enable > Config > Port-2 interface

This context provides commands for configuring Port-2.

end

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

end

Switches to parent context.

duplex

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

duplex (auto half full)

Sets the duplex mode on Port-2.

Parameters

auto

Lets the AP automatically set duplex mode based on the type of equipment

 

it is connected to.

half

Forces the port to operate in half duplex mode.

full

Forces the port to operate in full duplex mode.

speed

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

speed (auto 10 100)

Sets the speed of Port-2.

Parameters

auto

Lets the AP automatically set port speed based on the type of equipment it

 

is connected to.

100

Forces the port to operate at 100 mbps.

10

Forces the port to operate at 10 mbps.

vlan

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

vlan <id>

Sets the default VLAN ID. Range: 1 - 4094. All outgoing traffic that does not have a VLAN already assigned to it, is sent on this VLAN.

no vlan

Deletes the default VLAN ID.

2-41