CLI commands

WAN IP interface context

Path: View > Enable > Config > WAN IP interface

This context provides commands for configuring various IP-networking related settings.

pppoe client user

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

pppoe client user <username> <password>

Sets the PPPoE username and password.

no pppoe client user

Deletes the PPPoE username.

Parameters

<username>

The username assigned to you by your ISP. The AP will use this username

 

to log on to your ISP when establishing a PPPoE connection.

<password>

The password assigned to you by your ISP. The AP will use this username

 

to log on to your ISP when establishing a PPPoE connection.

ip address mode

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

ip address mode (dhcp pppoe static)

Sets the IP addressing mode for Port-2.

Parameters

dhcp

Dynamic host configuration protocol. The DHCP server will automatically

 

assign an address to the AP, which functions as a DHCP client.

pppoe

Point-to-point protocol over Ethernet. The PPPoE server will automatically

 

assign an IP address to the AP. You need to supply a username and

 

password so the AP can log on.

static

This option enables you to manually assign an IP address to the AP.

ip address

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

ip address <ip address>/<mask>

Sets a static IP address for the port.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

ip default-gateway

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

ip default-gateway <ip address>

Sets the IP address of the default gateway.

2-45