CLI commands

VLAN interface context

Path: View > Enable > Config > Port-2 interface > VLAN interface

View > Enable > Config > Port-1 interface > VLAN interface

View > Enable > Config > Local mesh > VLAN interface

This context provides commands for configuring Virtual LANs (VLANs). In this context, VLANs can be added or edited.

For example, to create a new VLAN interface named "hongkong" on the LAN port with VLAN id 88, do the following:

CLI(config)# interface lan

CLI(if-lan)# interface vlan 88

CLI(if-vlan)# vlan name hongkong

CLI(if-vlan)# ip address mode dhcp

CLI(if-vlan)# no nat

CLI(if-vlan)# end

CLI(if-lan)#

end

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

end

Switches to parent context.

ip address

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

ip address <ip address>/<mask>

Sets a static IP address for the VLAN.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

ip address mode

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

ip address mode (dhcp static none)

Sets the IP addressing mode for this VLAN interface.

Parameters

dhcp

Dynamic host configuration protocol. The DHCP server will automatically

 

assign an address to the AP, which functions as a DHCP client.

static

This option enables you to manually assign an IP address to the AP.

none

This VLAN does not have an IP address.

2-67