HP MSM3XX Local mesh context, end, active, interface, remote mac, local mesh name

CLI commands

Local mesh context

Path: View > Enable > Config > Local mesh

This context provides commands for configuring local meshes.

end

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

end

Switches to parent context.

active

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

active

Activates the local mesh.

no active

Deactivates the local mesh.

interface

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

interface (radio1 radio2 radio3)

Select the interface to which this local mesh link applies.

no interface (radio1 radio2 radio3)

Select the interface to remove for this local mesh link.

local mesh name

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

local mesh name <name>

Renames the current local mesh link.

remote mac

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

remote mac <address>

Sets the MAC address of the remote access point.

no remote mac

Deletes the MAC address of the remote access point.

Parameters

<address>	MAC address. Specify 6 pairs of hexadecimal numbers separated by
	colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01

2-69