CLI commands

Parameters

<name>

Location where the AP is installed.

snmp-server port

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server port <port number>

Sets the port the AP will use to respond to SNMP requests.

Parameters

<port number> SNMP port number. Range 1 - 65535.

snmp-server readonly

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server readonly <community>

Sets the read-only community string.

no snmp-server readonly

Deletes the read-only community string.

snmp-server readwrite

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server readwrite <community>

Sets the read-write community string.

no snmp-server readwrite

Deletes the read-write community string.

snmp-server trap

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap

Enables support for SNMP traps.

no snmp-server trap

Disables support for SNMP traps.

snmp-server trap community

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap community <str>

Sets the password required by the remote host that will receive the trap.

no snmp-server trap community

Deletes the password required by the remote host that will receive the trap.

2-21