CLI commands
Note: The actual transmit power used may less than the value specified. The AP determines the power to used based on the settings you made for regulatory domain, wireless mode, and operating frequency.
antenna bidirectionnalSupported on: MSM310 MSM320 MSM335 MSM410 MSM422
antenna bidirectionnal (diversity main auxiliary)
Sets the antenna to transmit and receive on. Select diversity to transmit and receive on both antennas.
Parameters
diversity | In this mode both antennas are used to transmit and receive. The AP |
| supports both transmit and receive diversity. |
main | Transmit and receive on the main antenna only. |
aux | Transmit and receive on the aux antenna only. |
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
antenna gain <number>
Used only for Radar detection, records gain (in 5GHz band) of external antenna installed on device. Does not affect output power.
autochannel skipSupported on: MSM310 MSM320 MSM335 MSM410 MSM422
autochannel skip <chan>
Adds the specified channel to the list of channels that are not allowed to be selected by the Auto Channel algorithm.
no autochannel skip <chan>
Removes the specified channel to the list of channels that are not allowed to be selected by the Auto Channel algorithm.
beacon intervalSupported on: MSM310 MSM320 MSM335 MSM410 MSM422
beacon interval <value>
Sets the beacon interval.
Parameters
< value> | Beacon interval value in the range 20 and 500 time units (TU) (1 TU = |
| 1024us). |
Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
dot11 automatic frequency
Enable this option to have the AP automatically determine the best operating frequency.