CLI commands

no dot11 automatic frequency

Disable automatic frequency selection.

dot11 automatic frequency period

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

dot11 automatic frequency period (disabled 1h 2h 4h 8h 12h 24h)

Specify how often the frequency setting is re-evaluated when automatic frequency selection is enabled.

dot11 automatic frequency time

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

dot11 automatic frequency time <time>

Specify when the channel should be re-evaluated.

dot11 automatic transmit-power

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

dot11 automatic transmit-power

Enables automatic transmit power selection.

no dot11 automatic transmit-power

Disables automatic transmit power selection.

dot11 automatic transmit-power period

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

dot11 automatic transmit-power period (1h 2h 4h 8h 12h 24h)

Sets the interval at which the transmit power setting is re-evaluated when automatic power selection is enabled.

multicast rate

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

multicast rate (1 2 5.5 6 9 11 12 18 24 36 48 54)

Sets the transmit rate for multicast traffic.

This is a fixed rate, which means that if a station is too far away to receive traffic at this rate, then the multicast will not be seen by the station. By rasing the multicast rate you can increase overall throughput significantly.

station distance

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

station distance (0km 5km 10km 15km 20km 25km 30km 35km)

Fine tunes internal timeout settings to account for the distance that wireless links span. For normal operation, the AP is optimized for links of less than 1 km.

2-51