CLI commands

Parameters

 

<bytes>

Maximum size (in bytes) of a PPPoE packet when transmitting. Range: 500

 

- 1500 bytes.

pppoe unnumbered

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

pppoe unnumbered

Enable unnumbered mode.

no pppoe unnumbered

Disable unnumbered mode.

This feature is useful when the AP is connected to the Internet and NAT is not being used. Instead of assigning two IP addresses to the AP, one to the Internet port and one to the LAN port, both ports can share a single IP address. This is especially useful when a limited number of IP addresses are available to you.

2-47