CLI commands

snmp-server trap unauthorized-ap interval

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap unauthorized-ap interval <number>

If set to 0, then traps are only sent when a rogue access point is detected. If set to 0, the entire list of rogue access points is sent each time the interval expires.

wireless-scan

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

wireless-scan

Enables wireless neighborhood scanning.

no wireless-scan

Disables wireless neighborhood scanning.

wireless-scan period

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

wireless-scan period <seconds>

Specifies the interval between wireless neighborhood scans.

Parameters

<seconds>

Scanning interval. Range: 10 - 600 seconds.

wireless-scan url

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

wireless-scan url <location>

Sets the URL of the file that contains a list of all authorized access points.

no wireless-scan url

Deletes the URL of the file that contains a list of all authorized access points.

The format of this file is XML. Each entry in the file is composed of two items: MAC address and SSID. Each entry should appear on a new line.

For example:

00:00:00:07:f5:11 "AP_1"

00:00:00:07:f5:23 "AP_2"

00:00:00:07:f5:12 "AP_3"

access controller shared secret

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

access controller shared secret <secret>

Sets the shared secret used to communicate with the service controller.

no access controller shared secret

Sets the shared secret used to communicate with the access controller.

2-35