CLI commands

no mandatory authentication

MAC-based authentication is not mandatory.

mac authentication radius profile

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication radius profile <radiusname>

Specifies the name of the RADIUS profile to use for MAC-based authentication.

no mac authentication radius profile

Do not use a RADIUS profile.

mac authentication radius stationid case

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication radius stationid case (uppercase lowercase)

Specifies the case applied to the station delimiter if it is a letter.

mac authentication radius stationid delimiter

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication radius stationid delimiter (null colon dash dot space comma under)

Specifies the one-character delimiter that will be used to format both the calling station ID and the called station ID attributes in RADIUS packets.

mac authentication

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication

Enables support for MAC-based authentication.

no mac authentication

Disable support for MAC-based authentication.

add ip filter

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

add ip filter <ip address>/<mask>

Adds an IP filter to the list of destination addresses that traffic will be accepted for. All other traffic will be blocked.

If the list is empty, then all wireless-to-wired LAN traffic is permitted.

Where:

 

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

2-61