CLI commands

no snmp-server trap wireless-reassociation-success

Do not send this trap.

snmp-server trap syslog-matches

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap syslog-matches

Send a trap when syslog messages matches a specified regular expression.

no snmp-server trap syslog-matches

Do not send this trap.

snmp-server trap syslog-matches regex

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap syslog-matches regex <regex>

Sets the regular expression used to match the syslog messages.

snmp-server trap syslog-severity level

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap syslog-severity level (debug info notice warning error critical alert emergency)

Set the severity level of syslog messages that will trigger a trap.

snmp-server trap network-trace

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

snmp-server trap network-trace

Send a trap when a network trace is started or stopped.

no snmp-server trap network-trace

Do not send this trap.

firmware-update automatic

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

firmware-update automatic

Enables scheduled firmware upgrades.

no firmware-update automatic

Disables scheduled firmware upgrade.

The AP can automatically retrieve and install firmware from a local or remote URL at preset times. By placing AP firmware on a web or ftp server, you can automate the update process for multiple units.

When the update process is triggered the AP retrieves the first 2K of the firmware file to determine if it is different from the active version. If different, the entire firmware file is then downloaded and installed.

2-30