HP X1000, nx7000 manual Disconnect the SD Card slot board cable 1 from the system board, 5-42

Models: X1000

1 174
Download 174 pages 49.84 Kb
Page 125
Image 125
Removing the System Board Screws

Removal and Replacement Procedures

2.Disconnect the SD Card slot board cable 1 from the system board.

3.Remove the PM2.5×5.0 screw 2 that secures the SD Card slot board cable ground loop to the base enclosure and the PM2.5×5.0 screw 3 that secures the system board to the base enclosure.

Removing the System Board Screws

5–42

Maintenance and Service Guide

Page 125
Image 125
HP X1000, nx7000 Disconnect the SD Card slot board cable 1 from the system board, Removing the System Board Screws, 5-42